Skip to main content

Sports and games

Technical drawings

Drawings detailing technical guidance for embellishment design

Table 1: Sports and games - Technical drawing index
Embellishment
Description/drawing code
Product details/supplier
Other

Basketball half court 

Traditional basketball hoop: Grand Slam (or equivalent).

Court and line marking: No supplier specified.

Mulitgoal systems: Kompan (or equivalent) small or large multigoal system may be used as an alternative. 

  • Nets: Hoops must have hooks.  Nets are NOT to be installed. 
  • Sports surfaces must be non-slip and preferably without coloured surface application.
  • Optional: line marking may include handball and hopscotch pavement games.
  • Install seating for parents/carers.

Cricket pitch

No supplier specified
  • Sports surfaces must be non-slip and preferably without coloured surface application.
  • Install seating for parents/carers.

Handball court

No supplier specified
  • Sports surfaces must be non-slip and preferably without coloured surface application.
  • Install seating for parents/carers.

Chessboard

No supplier specified
  • Sports surfaces must be non-slip and preferably without coloured surface application.
  • Install seating for parents/carers.

Table tennis

No supplier specified
  • Sports surfaces must be non-slip and preferably without coloured surface application.
  • Install seating for parents/carers.

Netball shooting circle

No supplier specified
  • Nets: Hoops must have hooks.  Nets are NOT to be installed. 
  • Sports surfaces must be non-slip and preferably without coloured surface application.
  • Install seating for parents/carers.

Luminance contrast:   Note product images depict samples of products only. Luminance contrast requirements refer to the product and the background against which it is installed.

Page payload data

This component is currently in development

 

Sunshine Coast Open Space Landscape Infrastructure Manual (LIM) DISCLAIMER

Disclaimer

Information contained in this document may change without notice and you should use the current material available from Council’s website and not rely on material previously printed or stored by you.

All figures and diagrams are intended to be used as an aid to design and include Council’s preferred elements but they are not intended to be prescriptive and may need to be varied as dictated by site specific factors. While Council has exercised reasonable care in preparing this document, it does not warrant or represent that it is accurate or complete. The Council will not accept responsibility for any loss, damage, cost or expense that you may incur as a result of the use of or reliance upon any material contained in this document.

This document is produced to convey general information and is not intended to constitute advice whether professional or legal. Any reference to legislation in this document is not an interpretation of the law. It is to be used as a guide only. Consult relevant authority websites for current documents, revisions and amendments.

Where a particular product or supplier is profiled in this document, Council is NOT nominating this product or supplier as the selected choice. Product/supplier information has been provided to allow users to source products which contain the correct elements required for Council embellishments. Each product profiled states ‘or equivalent’ which means that different products may be supplied provided they satisfy the identified performance criteria, recommended standards, equal access guidance and product specifications.

Product design, manufacture and installation requires appropriately qualified people to provide site specific solutions to ensure the embellishment is appropriately adapted to local conditions and data.

This document does not override requirements stipulated in a development approval. Project specific variations may be appropriate as a result of site, environmental or other constraints. Any variations to these standards must be approved in writing by council prior to commencement of variation works. Components of this document may be used within a contract document but users should undertake their own investigations to confirm the information is suitable for this purpose.

Drawings contained in this document are NOT FOR CONSTRUCTION.

Details in this document are deemed to be the minimum standard and the user may wish to apply a higher standard subject to approval by council.

Acknowledgements

Council wishes to thank all contributors and stakeholders involved in the development of this document.

Copyright

Sunshine Coast Regional Council (Council) supports and encourages the distribution of its material however, copyright protects this document. Council has no objection to this material being reproduced but only if council is recognised as the owner of the copyright and this material remains unaltered.

https://www.sunshinecoast.qld.gov.au[email protected]07 5475 7272

Sunshine Coast Open Space Landscape Infrastructure Manual (LIM)

 | 

© LIM 2024 – 2026

 | 

Version 0.0.38.beta

 | 

Last Updated: 01/04/2026 12:27 AM

Preview