Barbecues

Site planning
Best practice guidance for site planning
Decision framework
There are a range of Australian Standards/best practice guidelines, relating to this category. Key documents are referenced throughout and in the LIM Barbecues - Standards.
Site decisions
All decisions, including the location of the embellishment and related infrastructure, must be made in conjunction with council (determined by site location), including officers from such areas as:
- Council (Parks and Gardens)
- Council (Environmental Operations)
Users
Consult with council stakeholders, neighbouring properties and identified park users in the planning stage of a project.
Site conditions
Consider the physical characteristics of a site and requirements of the activities conducted:
- prevailing winds (this is an important factor as a windshield may be required for the barbecue)
- location of utilities
- well drained site
- level surface
- flood immunity requirements.
Co-location of facilities:
- Barbecues MUST be located in conjunction with:
- Bins
- Taps (both maintenance and public access)
- Picnic tables and benches
- Shelters.
- Co-locate barbecues with picnic facilities.
- Locate near electrical service for connection.
- Locate near toilets, drinking fountains, bins, bike rails, car parking and public transport.
Safety
- Safety clearances must be met.
- Adopt principles of Crime Prevention Through Environmental Design (CPTED) - Guidelines for Queensland.
- Locate barbecues to allow users to feel safe, and to provide an opportunity for casual surveillance
Potential site conflicts
Locate barbecues away from:
- Fenced and unfenced dog exercise areas (DOLAs)
- Dogs are prohibited within 5.0 m of a barbecue facility in a park or reserve under the Council local law.
- Outdoor ashtrays
- To minimise tobacco smoke and odour on food preparation, smoking is not advised within 10 m of a barbecue facility.
- Irrigation systems
- Hazards such as waterways, fire and flood prone areas, sewers and stormwater drains.
Smart technology
Smart infrastructure must be installed only where appropriate and only when approved by the asset custodian.
See LIM Smart technologies for further guidance, including key considerations for installation.
Planning for sustainability
Refer Design principles – Sustainability for guidance.
Planning for future works
- Co-locate embellishments requiring similar services e.g. water, to reduce infrastructure, where possible.
- Where underground utilities are installed, set brass markers to concrete slab edges to indicate the location.
- Consider installation of additional conduits under concrete slabs for future provision, where utilities (e.g. electrical, water) and irrigation systems are planned. Ensure additional conduit is capped to prevent ingress of water and debris.
- Consider climate change impacts on the embellishment location and construction 1.
- In coastal areas, or near waterways, design should consider rise in sea level predictions, storm tide, salt inundation and severe storm events.
- Positioning should also consider flooding, seasonal/ephemeral water bodies and water table changes.
- Near bushland areas, design should consider the occurrence of bushfires.
Source 1: Sunshine Coast Environment and Liveability Strategy 2017.
This component is currently in development